GRC構件具有高強度、高韌性、耐火、耐水等優點，所以很受人們的歡迎，當然要想更好的使用就要經常維護保養它，GRC構件的維護有一定的順序可循，下面來看看吧。

　　GRC components have high strength, high toughness, fire resistance, water resistance and other advantages, so it is very popular with people, of course, to better use will often maintain it, GRC component maintenance has a certain order to follow, let's see.

　　改性后，通常需要用干凈良好的聚乙烯薄膜包裹模具，使GRC構件中的水分受蒸發和風的影響，也有助于保持水化熱。它在固化初期要固定好，它可以有足夠的強度，使其在脫模和搬運過程中不會損壞。

　　After modification, it is usually necessary to wrap the mould with a clean polyethylene film, which makes the moisture in the GRC member subject to evaporation and wind and also helps to retain the heat of hydration. It should be fixed in the initial curing stage, and it can be strong enough that it will not be damaged during demoulding and handling.

　　脫模后繼續保護GRC構件，防止其受到光、風、雨和低濕的影響。一般仍使用塑料薄膜包裹GRC以避免陽光直射，它們可以保持局部濕度。

　　After demoulding, continue to protect GRC components from light, wind, rain and low humidity. Plastic films are still used to wrap the GRC to protect it from direct sunlight, and they maintain local humidity.

　　GRC構件在存放和使用過程中，由于周圍環境和維修階段差異明顯，還需要進行一定的維修操作。這時候可以用一些簡單的方法來保證在存放的過程中不被放倒，它將暴露在直射陽光下。

　　In the process of storage and use of GRC components, due to obvious differences in the surrounding environment and maintenance stage, certain maintenance operations are needed. There are some simple ways to make sure it doesn't fall down during storage and that it will be exposed to direct sunlight.

　　此外，濟南GRC構件的生產過程要了解到，施工準備入場組件檢查各種五金、支架制作尋找外墻土建基線根據GRC配置規范放置線設置GRC組件位置堵塞、維修維護部分驗收。

　　In addition, ji 'nan GRC component production process to understand, construction preparation entry components check all kinds of hardware, support production looking for external wall civil baseline according to the GRC configuration specification placement line set GRC component location blockage, maintenance acceptance.

　　根據建筑裝飾的設計圖紙測量現有建筑，結合圖紙布局對鋼骨架位置和GRC構件形狀的要求，設計GRC構件，使GRC構件符合網格大小、位置，滿足裝飾設計的形狀要求進行GRC零部件的生產加工。

　　According to the architectural decoration design drawings to measure the existing building, combined with the layout of the steel skeleton position and GRC component shape requirements, design GRC components, make GRC components in line with the grid size, location, meet the shape requirements of decorative design GRC parts production and processing.

　　GRC構件的實際維護過程分為以上幾個階段，對GRC的維護可以延長它們的使用時間，所以我們在維護過程中一定不能粗心大意，以免造成損壞。更多內容就來網站m.dahuachengtao.com看看吧。

　　GRC component of the actual maintenance process is divided into the above several stages, the maintenance of GRC can prolong their use time, so we must not be careless in the maintenance process, so as not to cause damage. Find out more at m.dahuachengtao.com.